1. Pickle Pastes for cleaning of Seam Welds

2. Spray pickling procedures for large areas

3. Pickle Solutions

4. Complementary Products

POLINOX – P RAPID

High strength pickle paste, which quickly and completely removes heavy scale and burning from high alloy materials.

Colour: Orange

POLINOX – P RETARD

Concentrated pickle paste, which quickly and thoroughly removes weld scale, discolouration and ferritic contamination, thereby restoring the full corrosion resistance of the material without noticeable attack on the base metal.

Colour: Red

POLINOX – P NORMAL

Standard pickle pastes which quickly and efficiently removes scale, discolouration and ferritic contamination from seam welds.

Colour: White

POLINOX – UP

POLINOX – UP is a mild pickle paste, which removes discolouration and ferritic contamination from welds without attacking the base metal.

POLINOX – UP is free from Nitric Acid and contains less than 1% Hydrofluoric Acid. It is therefore classified only as corrosive and not as poisonous.

Colour: White

POLINOX – FL AKTIV

POLINOX – FL AKTIV is a sprayable, thixotropic paste for the treatment of large surface areas, free standing vessels and process systems. Surfaces and welds are pickled simultaneously to the same quality standard as obtained by immersion.

POLINOX – FL AKTIV is applied using a POLINOX spray unit and after 30 – 80 minutes is rinsed off using a high-pressure water gun.

Colour: Red

POLINOX – US

POLINOX – US is a mild sprayable pickle paste, which removes discolouration and ferritic contamination from the surface without attacking the surface itself. It is therefore suitable for use with superior, decorative Stainless Steel surfaces. It can also be used with Aluminium to give a matt surface.

POLINOX – US contains no Nitric Acid and less than 1% Hydrofluoric Acid. During use no dangerous nitrous gases are given off. It is classified as corrosive rather than poisonous.

Colour: White

POLINOX – B Bath Pickle

POLINOX – B Bath Pickle is used by immersion, sprinkling through pumping and pickle spray units. Special addictives reduces the NOx emissions and reduces the nitrate content in the rinse water. They also improve the pickling at higher metal contents. It is delivered as concentrate, which is diluted with water.

POLINOX – UB Pickle Solution

POLINOX – UB is a pickle solution with out Nitric and Hydrofluoric Acid. Its use is not subject to authorisation and control. It removes ferritic contamination and discolouration also from ferritic Stainless Steel. POLINOX – UB can be used chemically or electrochemically.

POLINOX – AB

POLINOX – AB is an anodic pickle solution for the descaling, cleaning and passivating of austenitic, ferritic and martensitic Stainless Steel. It is free from Nitric and Hydrofluoric Acids.

POLINOX – ROVI SUPER Pickle Bath Addictive

POLINOX – ROVI SUPER, when added to the pickle solution improves pickling performance, life of solution and allowable metal content. The emission of NOx is reduced, as is the formation of nitrates and chromates.

POLINOX - C CLEANER

POLINOX – C CLEANER will degrease, clean and remove loose rust in one operation.
POLINOX – C CLEANER is free from Nitric and Hydrofluoric Acids. It is also suitable for cleaning Aluminium.

POLINOX – PROTECT

Polinox protect is a new product from POLIGRAT formulated to optimise the corrosion resistance of austenitic stainless steel. It works by significantly improving the behaviour of the surface passive layer. Treatment with POLINOX Protect can increase the corrosion resistance to a degree, which until now could only be achieved by the use of much more expensive processing.

Polinox - B protect is supplied as a liquid concentrate, which is then diluted.

Polinox -FL protect is the sprayable paste version allowing the efficient treatment of large free standing surface areas.